Using the Web UI
3004149-0001 Revision B
37
Settings page
General Setup
This page allows the user to configure various parameters of the
UT. A description of each item follows:
Terminal Startup
– by default Bypass Antenna pointing is not
selected but if the terminal is permanently mounted you can
select this option to bypass antenna pointing on subsequent
power ups. For permanent installs you can also configure the
unit to always power on when mains is connected to avoid
having to use the power button.
Streaming
– By enabling this parameter, the user can turn on a
timer for inactivity on streaming connections. The timer is in
either seconds or minutes and will tear down a streaming context
after
X
seconds or minutes of inactivity.
Emergency Call Numbers:
Allows the user to add the
emergency call number that is applicable in the part of the world
where the terminal is being used, if it is not already defined.
