Inline IN2118 Скачать руководство пользователя страница 27

 

 

25 

©2001  -  Inline, Inc.                                                                                 IN2118 Operation Manual  -  Preliminary  01/31/01 

Warranty 

 
 
     

 

INLINE warrants the equipment it manufactures to be free from defects in materials and 

 workmanship. 
 

 

If equipment fails because of such defects and INLINE is notified within two (2) years 
from the date of shipment, INLINE will, at its option, repair or replace the equipment at 
its plant, provided that the equipment has not been subjected to mechanical, electrical or 
other abuse or modifications. 

 

 

Equipment that fails under conditions other than those covered will be repaired at the 
current  price of parts and labor in effect at the time of repair.  Such repairs are warranted 
for ninety (90) days from the day of re-shipment to the Buyer. 

 

 

This warranty is in lieu of all other warranties expressed or implied, including without 
limitation, any implied warranty or merchantability or fitness for any particular purpose, 
all of which are expressly disclaimed. 

 

 
 
 
 
 
 
 

The information in this manual has been carefully checked and is believed to be accurate.  However, 
INLINE, Inc. assumes no responsibility for any inaccuracies that may be contained in this manual.  In 
no event will INLINE, Inc. be liable for direct, indirect, special, incidental, or consequential damages 
resulting from any defect or omission in this manual, even if advised of the possibility of such 
damages.  The technical information contained herein regarding IN2118 features and specifications is 
subject to change without notice. 
 
Apple, Mac and Macintosh are registered trademarks of Apple Computer, Inc.  Sun, Sun 
Microsystems, and the Sun Logo are trademarks or registered trademarks of Sun Microsystems, Inc. in 
the United States and other countries.  SGI is a trademark of Silicon Graphics, Inc. All other 
trademarks and registered trademarks are the property of their respective companies. 
 

 

 

All Rights Reserved   © Copyright 2001 

 

 

 

 

  
 

                      © INLINE, INC.  

  810 West Taft  

  Orange, CA  92865 

 

(800) 882-7117   

    (714) 450-1800   

   Fax  (714) 450-1850   

   www.inlineinc.com 

Содержание IN2118




























Отзывы: