1
2
3
4
5
6
Safety Information
● To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings
and instructions included with and on the the fixture box and all fixture labels.
● Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
● Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
● For Residental installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check
your local electrical code.
● DO NOT INSTALL DAMAGED PRODUCT!
● This fixture is intended to be connected to a properly installed and grounded UL listed junction box.
● These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with
installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for
the purchaser’s or owner’s purpose, this matter should be referred to Inlight Co. Ltd.
Pre-Installation
PLANNING INSTALLATION
Compare all parts with the parts listed in the package contents section. If any part appears missing or damaged, do not install and use this light. Contact
customer service.
TOOLS REQUIRED
● Phillips Screwdiver
● Ladder
● Safety Goggles
● Wire Cutter
● Wire Stripper
DIMMABLE FUNCTIONALITY
This fixture is dimmable with most regular dimmers. Following dimmers tested to be compatible with this fixture, dimming range up to: 10%-100%.
If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician do your installation.
MAX. LOAD
600W
600W
150W
300W
300W
DV-603PG
600W
DVELV-600P
LUTRON
LUTRON
PD-6WCL-WH
INCANDESCENT / HALOGEN
PART NO.
DVCL-153P
***CONSULT A LOCAL LICENSED ELECTRICIAN OR ELECTRICAL CONTRACTOR IF YOU ARE NOT SURE ABOUT THE INSTALLATION.***
MANUFACTURER
LUTRON
LUTRON
LUTRON
DV-600P
INCANDESCENT / HALOGEN / CFL / LED
INCANDESCENT / CFL / LED
INCANDESCENT / HALOGEN
CFL / LED
MAGNETIC LOW VOLTAGE
MACL-153M
IMPORTANT SAFETY INSTRUCTIONS
LUTRON
TYPE
Note:
Safely dispose of packaging materials. Assistance
will be required to support fixture during installation.
● Level
WARNING: RISK OF ELECTRICALSHOCK
● Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
● Turn off the power when you perform any maintenance.
● Verify that supply voltage is correct by comparing it with the luminaire label information.
● Make all electrical and grounded connections in accordancewith the National Electrical Code and any applicable local code requrirements.
● All wiring connections should be capped with UL approved wire connectors.
CAUTION: RISK OF INJURY
● Wear gloves and safety glasses at all times when removing luminaire from carton,installing, servicing or performing maintenance.
● Avoid direct eye exposure to the light source while it is on.
● Account for small parts and destroy packing material, as these may be hazardous to children.
WARNING: RISK OF BURN
● Allow fixture to cool before handling. Do not touch enclosure or light source.
● Do not exceed maximum wattage marked on luminaire label.
● Follow all lamp manufacturer’s warnings, recommendations and restrictions for: driver type, burning position, mounting locations/methods,
replacement, and recycling.
CAUTION: RISK OF FIRE
● Keep combustible and other materials that can burn away from luminaire and lamp/lens.
