TILT Assembly Manual
Code No.: MD03001-00-1107
17
Step 16
Install the third belt
tensor in the servo
assembly with the
M3x25 screw and one
washer (
instead of the
red aluminium part in
the picture: not
provided
) and on the
other side of the 3D
printed red part, insert
first the split washer,
then the Nylon cylinder,
then the IGUS bearing,
the washer and finally
the M3 lock nut.
Lift the arm support
tensors to the middle
approx. and keep the
servo belt tensor loose
for now.
PARTS
Same as step 15
1x IGUS bearing (small)
1x Nylon cylinder 10 mm
HARDWARE
1x screw M3x25
1x lock nut M3
2x washer for M3
1x split washer for M3
Servo belt tensor
