Inkbird BBQ GO BG-CT2C, Быстрый старт

Страница: 2 / 3

04
Low Battery Indicator
08
FCC Requirement
05
Diagram of Meat Type
and Taste
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
The icon flashes to remind users that it’s the time
to change batteries and users have to change batteries
immediately if the icon is always on, all the buttons
are invalid, all functions are turned off, and the product
cannot be used normally at this time, the battery must
be replaced if you want to use it normally.
06
Help Hints
07
Technical Assistance and
Warranty
If the product displays “LLL” or “HHH”, please wait for
probe to reach indoor temperature. If “LLL“ or ”HHH” is
still displayed, please try harder to insert the probe
and rotate it to make good contact. If the problem still
persists, it is likely the internal probe wire has been
damaged by the moisture or high temperature.
If the product displays “Er”, the internal probe wire has
been damaged by the moisture or high temperature.
The probe and wire cannot be touched by the flame.
Please don’t submerge the unit in water.
If the probe shows that the reading is too high or the
temperature rises too fast, please check to make
sure
the probe does not poke on the food. It is recommend-
ed that the probe be inserted into
the thickest part of
the meat to avoid contacting with bones or fat.
Gloves should be used during the process of cleaning
and using the probe, and the probe or wire should not be
touched immediately after using to avoid scalding or
stabbing.
Please keep children away from probes.
The probes should be cleaned well and dried out after
every using.
It is safe to use this product in rainy days, but it is not
allowed to be soaked in water or rinsed with water.
The plug part of the probe should not be washed with
water to avoid the poor contact between the plug and the
socket.
The product is not allowed to close to the fire, otherwise
it will melt and burn out.
Stainless steel probes cannot be used in microwave
ovens.
Do not exceed the probe temperature range
(32℉~572℉/0~300℃) to avoid damaging.
Children aged 12 or under should be used under the
guidance of parents.
Technical Assistance
If you have any problems installing or using this
controller, please carefully and thoroughly review the
instruction manual. If you require assistance, please
write us to support@inkbird.com. We will reply your
emails in 24 hours from Monday through Saturday. You
can also visit our website www.ink-bird.com to find the
answers of the common technical questions.
Warranty
INKBIRD TECH. C.L. warrants this thermometer for one
year from the date of purchase when operated under
normal condition by the original purchaser (not
transferable), against defects caused by INKBIRD’s
workmanship or materials. This warranty is limited to
the repair or replacement, at INKBIRD’s discretion, of all
or part of the thermometer. The original receipt is
required for warranty purposes.
changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20cm between the radiator & your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
INKBIRD TECH.C.L
Support@inkbird.com
www.inkbird.com
Company Address Room 1803, Guowei Building,
NO.68 Guowei Road, Xianhu Community, Liantang,
Luohu District,Shenzhen
，
China
V 2.0