PAGE
4
13.
Press the injen tube into the turbo inlet pipe. Next
press the tube into the twist lock filter. Finally line up the
grommet to the stud and press down on the tube.
14.
Connect the MAF harness.
IF EQUIPPED:
Connect the crank case line.
15.
If not equipped with crank case line. Cap
the crank case fitting with the 3/4" vinyl cap
16.
Secure the clamp on the turbo inlet pipe.
Congratulations! You have just completed the installation of this intake system.
Periodically, check the alignment of the intake, normal wear and tear can cause nuts
and bolts to come loose.
Note: Check clearance and adjust if needed! Failure to check
the alignment and adjust the intake can cause damage that will void the warranty.
Injen Technology is not responsible for any damages caused by/from improper
installation.
18.
IF EQUIPPED:
Reinstall the strut tower
brace.
1
9
.
Ensure all bolts and clamps are
secured properly.
1
7
.
Secure the clamp on the twist lock filter.
