PAGE 2
BEFORE YOU BEGIN
Please check the list of parts included and report any defective or missing parts to the authorized Injen
dealer you purchased this product from.
Before installing any parts of this system, please read the
instructions thoroughly. If you have any questions regarding installation, please contact your Injen
Technology dealer. Installation DOES require some mechanical skills.
A qualified mechanic is always
recommended.
This product includes a
Limited Lifetime Warranty
to the original purchaser against defects in material and
workmanship on all Injen intake systems excluding the filter element. Any and all warranty coverage is
limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. The
warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or
removal of the defective part or its replacement.
Proof of purchase is required.
Do not attempt to install the intake system while the engine is hot.
Severe burn could result from
touching hot engine components.
WARNING:
Failure to follow installation instructions and not using the provided hardware may damage the
intake system, engine, or components of either.
CARB Note:
Injen intake systems are street legal in most states unless the state is adopting to California
Emissions standards. States that have adopted California emission standards include: Arizona, California,
Connecticut, District of Columbia, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York,
Oregon, Pennsylvania, Rhode Island, Vermont, and Washington. These states will require a California Air
Resource Board Executive Order Number (CARB E.O.) for the legal use of an Injen intake system in your
vehicle for use on public roads or highways. Otherwise, the vehicle will be considered "Legal in California
only for racing vehicles competition use only, which may never be used upon a public street or highway.”
Please keep your factory air intake system for any future on-road use.
Note:
It is always recommended to disconnect your battery before disconnecting any sensors.
Do not use water or filter oil to clean!
You can use a vacuum cleaner or compressed air to
clean.
If you’re using a vacuum cleaner, follow the direction
of the pleats on the outside of the filter element.
If you’re using compressed air, make sure it never
exceeds 25 PSI. Use a blower from the inside of the
element towards the outside, following the direction
of the pleats.
Injen Technology’s Oiled Filter Restore Kit (P/N:
X-1030) is recommended for cleaning and
maintenance.
Use the cleaning solution or water to wash out the
filter element, then use Injen’s Proprietary Filter Oil
to re-oil the element. The amount of oil to use in
grams is provided on the product page for the filter
at https://injen.com. Let sit for 24 hrs for the oil to
completely saturate the cotton gauze media.
FILTER MAINTENANCE
SuperNano-Web Dry Air Filter
(Blue Media)
8-Layer Oiled Cotton Gauze Air Filter
(Red Media)
