PAGE 3
1.
OEM intake.
2.
Disconnect
t
he
MAF harness.
IF EQUIPPED:
Disconnect the crank case line.
3.
Loosen the clamp holding the OEM
tube.
4.
IF EQUIPPED:
Remove
the
four
bolts holding the strut tower brace.
5.
IF EQUIPPED:
Remove the strut
tower brace.
6.
Remove the OEM intake assembly.
7.
Remove the two screws holding the MAF
sensor and then remove the MAF sensor.
8.
Install the MAF sensor into the Injen tube
and secure using the provided M4 x 0.7
button head screws.
9.
Remove the grommet from the OEM
tube.
10.
Install the grommet into the Injen tube.
11.
Install the twist lock filter on to the Injen air
box. Once seated, rotate the filter a 1/4 turn in
either direction so the filter can lock into place.
1
2
.
Install the Injen air box into the engine bay.
Line up the studs on the air box to the factory
grommets and press down on the box.
