I
. PREPARATIONS BEFORE OPERATION
· 12 ·
Cautions before connection
This product is designed for negative ground 12V DC operation only.
Before making connections, turn the car ignition off to avoid short circuits.
Connect the yellow power input lead only after all other leads have been connected.
Run all ground wires to a common ground point.
Use of controls adjustments or performance of procedures of other than those specified
herein may result in hazardous radiation exposure.
Connecting the Power
1. First connect the black (GROUND) lead to a metal surface on the car.
2. Connect the blue (DOOR+) or white (DOOR-) leads to the door switch of the car.
3. Connect the yellow (POWER) input lead to the +12V power terminal. Be sure to connect the
black (GROUND) lead first.
Connecting the Inputs
1. Connect the monitor's power supply cords correctly, according to the upper connections
diagram.
2. Connect external equipments to this monitor through AV1 IN and/or AV2 IN cables.
1) Connect the audio cables to the AUDIO OUT L (left-white) and R (right-red) jacks of your
external equipments, and to the corresponding Audio Input jacks of the monitor's AV1 IN
or AV2 IN terminals.
2) Connect the video cable (yellow) to the VIDEO OUT jack of your external equipments,
and to the Video Input jack of the monitor's AV1 IN or AV2 IN terminals.
3. Turn on the monitor by pressing the SOURCE button on the main unit or on the remote
control, and turn external equipments on. Press the SOURCE button to select AV inputs
between AV1 IN and AV2 IN.
4. If use the built-in DVD player SL-262, press the SOURCE button to select "YC".
