INIM Electronics SmartLink-G, Руководство по программированию, Страница: 32 / 64

32 Programming the SmartLink-GP
Programming manual
only when a feedback ring is required (see paragraph 3.7.3 Inputs/Outputs).
In other cases, the call will proceed normally.
If Caller ID is disabled, the SmartLink-GP will be unable to identify the caller,
therefore, will manage the call as a normal call.
Attention: SmartLink-GP can identify these numbers during
incoming calls or SMS texts or outgoing calls, on the
GSM network only.
Note: For wildcard numbers, indicate the numbers with and
without the international code (e.g. “390611*” and
“0611*”).
For all other numbers, you can enter the number with or
without the respective international code).
For examples refer to the respective parameters in the following table.
Parameter Description Example
Divert SMS If selected, the SmartLink-GP
will divert incoming SMS text
messages from the phone
number concerned to the
phone number indicated in
the title of the column, that
is, the number selected as
Receive diverted
messages
in the
Phonebook .
NOTE
Texts must not contain more
than 70 characters. Texts
with more than 70 characters
will be cut.
For example, you can
assign one of the 100
phone numbers
available to the SIM
card provider for the
credit balance
messages; in this way
“Low credit" warnings
will be sent to the
assigned phone
number.
Black list -
Incoming If selected, calls from the
number concerned will be
barred. Wildcard can be used
for the first five numbers of
the list (e.g. “0611*). In this
way, all incoming calls from
numbers starting with the
digits concerned will be
barred. See
Black list call
warning to find out how the
device deals with these calls.
For example, you can
bar calls coming from a
hostile telephone
number or code.
NOTE
You must enter at least
two digits followed by
‘*’, and not more the
seven digits for
Wildcard numbers.