INIM Electronics SmartLink Advanced Series, Инструкция по установке и программированию

Страница: 11 / 40

Device description 11
Installation and programming manual
2-4
Signalling from device
The SmartLinkAdv also manages signalling on the LEDs and buzzer
as well as signalling events executed over-the-phone, via SMS
message, or triggered by output activations.
LEDS The SmartLinkAdv is equipped with six signalling LEDs, the
activation of which, thanks to light guides, can be seen on the
outside of the metal box.
The table shows the meanings of the LEDs when activated:
Table 2-3:
Technical specifications
Models SmartLinkAdv/P SmartLinkAdv/G SmartLinkAdv/GP
Voltage
Nominal output
voltage
13.8 V ±10%
Functioning range
11 - 16 V
PCB current-draw
during
standby status 40 mA 100 mA
during transmission - 300 mA
maximum 70 mA 600 mA
Maximum current draw of +AUX
terminals
400 mA
Switching power supply
14V 1.05A
Backup battery
12V, 1.2Ah lead battery
with UL94HB flame class or higher
Inputs 5
Outputs
total 5
Type 150 mA open-collector output
GSM frequency band - 850, 900, 1800 and 1900 Mhz (Quad band)
Number of events recorded 1000
Operating temperature from -10°C to + 40°C
Ambient Class II
Dimensions (W x H x D) excluding
antenna
134 x 220 x 53 mm
Dimensions (W x H x D) including
antenna
- 134 x 300 x 53 mm
Weight 890g
Table 2-4:
Technical specifications of the reserve line
Voltage 40Vdc
Loop current 25mA
Dialling tone 425Hz continuous
Engaged tone 200ms 425Hz / 200ms silent
Recognized dialling tone DTMF
Ring voltage 90Vpp
Ring frequency 25 - 50 Hz (selectable)