6
Configuration
Gateway BUS KNX
2-2
Using the software
application
IMPORTING THE
SMARTLEAGUE
PROJECT
To create a new project on first startup, select “
Import SmartLiving
solution
” from the “
Tools
” menu.
Then, in the “
Import Inim Data
” window, click-on the “
Browse file…
”
button and select the file in xml format, previously exported from the
SmartLeague software.
In this way, you can preview of the partitions, zones and outputs
configured through the SmartLeague software application and decide
which ones to import to the KNX gateway configuration.
IMPORTING GROUP
ADDRESSES
In order to import the group addresses present in an ETS project, you
must first export them from the ETS software via the “
Save as CSV/
XML
” function and “
Export to OPC Server
” option.
This procedure will create a file with .ESF extension which can be
imported via “
Tools \ Import ETS solution
”.
CONFIGURING THE
GENERAL SETTINGS
Once the importation process is complete, the “
Project Explorer
” window
will show all the control panels, partitions, zones and outputs. Select
“Control panel” to open the “
General Settings
” section:
This section will allow you to configure all the data essential for the
device functions. The “
Konnex Physical address
” option must be
consistent with the addresses assigned to the devices present in the
KNX installation.
The “
PIN code
” option must be consistent with a valid PIN code for the
SmartLiving control panel.
STATUS AND
COMMAND ADDRESSES
The “
Project Explorer
” window will allow you to select each of the
elements in the project (control panel, partitions, zones and outputs)
and assign the status and command addresses (refer to
paragraph 2-3
Status and command addresses
).
PROGRAMMING THE
GATEWAY
Once all the parameters relating to the control panel, partitions, zones
and outputs are complete, you must send the configuration, via the
Ethernet network, to the IGKNX100 gateway.
In order to do so, you must select the “
Tools / Program device
” option;
a dialog window will be shown:
•
if it will appear “
Compilation completed successfully
”, follow the
instructions before clicking on the “
Download Configuration
”
button.
•
if it will appear “
Compilation errors
”, you can not program the
device; find the causes of errors and correct them.
2-3
Status and command
addresses
Once the importation of the SmartLiving installation project and
addresses Konnex BUS device is complete, and the communication
parameters are set correctly, the application will allow you to associate
the signals from the SmartLiving control panel with the imported KNX
devices.
The “
Project Explorer
” project window shows all the elements of the
project (control panel, partitions, zones and outputs) and all the
respective signals: