INIM Electronics IGKNX100 Скачать руководство пользователя страница 10

10

Configuration

Gateway BUS KNX

Warranty

INIM Electronics s.r.l. warrants that this product shall be free of defects
in material and workmanship for a period of 24 months from the date of
production. As INIM Electronics s.r.l. does not install directly the
products indicated herein, and due to the possibility that they may be
used with other equipment not manufactured by us; INIM Electronics
s.r.l. does not warrant against any degradation of performance of the
security system. Seller obligation and liability under this warranty are
expressly limited to repairing or replacing, at seller's option, any
product not meeting its stated specifications. In no event shall INIM
Electronics s.r.l. be liable to the purchaser or any other person for any
loss or damage, whether direct or indirect or consequential or
incidental, including, without limitation, any damages for lost profits,
stolen goods or claims by any other party caused by defective products
or otherwise arising from the incorrect or otherwise improper
installation or use of these products.

This warranty applies only to defects in parts and workmanship relating
to normal use. It does not cover:

Damage arising from improper use or negligence;

Damage caused by fire, flood, wind or lightning;

Vandalism;

Fair wear and tear.

INIM Electronics s.r.l. shall at its option, replace or repair any defective
products. Improper use, that is, use for purposes other than those
mentioned herein will void this warranty. For further details regarding
this warranty contact the authorized dealer.

Limited 
Warranty

INIM Electronics s.r.l. shall not be liable for any damage caused by
improper use of this product.

The installation and use of the products indicated herein must be
carried out by authorized persons only. Moreover, the installation
procedure must be carried out in full respect of the instructions
provided in this manual.

Copyright

The information contained in this document is the sole property of INIM
Electronics s.r.l. No part may be copied or changed without written
authorization from INIM Electronics s.r.l.

All rights reserved.

Note to the 
installer

In order to provide adequate protection and instructions for proper use,
you (the installer) must be familiar with the operating procedure of the
intrusion control system. As the only individual in contact with system
users, it is your responsibility to instruct them on how to use this
product properly .

Technical 
Support

INIM Electronics s.r.l. provides a team of professional engineers who
are readily available to assist you.

D

C

MIINIEIGKN

X1

00-R

100

-20

1207

04

Содержание IGKNX100











Отзывы: