INIM Electronics Air2-OTT100W, Инструкция по установке и программированию

Страница: 5 / 12

Functioning 5
Installation and programming manual
The Air2-OTT100W detector communicates with INIM intrusion control panel via
the Air2 two-way wireless intrusion protection system.
1-4
Package contents
Inside the package you will find:
•
Air2-OTT100W detector
• Hermetic casing base
• Installing manual (this)
• Plastic bag containing:
•• 6 stainless steel metric screw M3 x 20
•• 4 anchor screws and plugs for wall mounting
•• “O ring” gasket
Items not included in the package (accessory items to be purchased separately):
•• “U” shaped brackets
•• “L” shaped brackets
2
FUNCTIONING
2-1
Detection range
ADJUSTMENT
Use the trimmer “MW” ( table 3, T ) to adjust the microwave sensitivity (the
sensitivity is increased turning it clockwise).
By using the knob (
table 2, F ) it is possible to move the PIR2 (lower) in order to
obtain different ranges from 3m to 12m.
Table 4: Technical specifications of Air2 system
Operating frequency
range 868.0 - 868.6MHz
selectable channels 868.1, 868.3, 868.5MHz
RF output power 25mW e.r.p.
Communication type Two-way
Modulation GFSK
Device supervision From 12 to 250 minutes
Table 5: Top view
A
Zones that can not be
covered
B
Zones that can be
covered by electronic
holder rotation
150°
60°
15°
15°
B
A
B
A