4. After gateway A and gateway B are configured, access the L2TP status page to
view the L2TP connection status.
5.3.4 OpenVPN
OpenVPN is realized based on the application-layer VPN of the OpenSSL library. It
supports multiple authentication methods such as the certificate, key, and user
name/password. Compared with the traditional VPN, it is simpler and easier to use.
Authentication methods:
Authentication method
Operation on the web page
None
No authentication is required.
User name/password
Enter the user name and password
created on the OpenVPN server, click
"VPN >> Certificate Management", and
import the CA certificate, public key,
and private key for authentication.
Pre-shared key
Enter the pre-shared key created on the
OpenVPN server.
Digital certificate
Click "VPN >> Certificate Management"
and import the CA certificate, public
key, and private key.
Digital certificate/user name/password
Enter the user name and password
created on the OpenVPN server, click
Содержание VG814
