![InHand VG814 Скачать руководство пользователя страница 1](http://html.mh-extra.com/html/inhand/vg814/vg814_user-manual_2061307001.webp)
InHand VG814 User's Manual V1.2
Declaration
Thank you for choosing our product. Before using the product, read this manual
carefully.
The contents of this manual cannot be copied or reproduced in any form without the
written permission of InHand.
Due to continuous updating, InHand cannot promise that the contents are consistent
with the actual product information and does not assume any disputes caused by the
inconsistency of technical parameters. The information in this document is subject
to change without notice. InHand reserves the right of final change and
interpretation.
©
2020 InHand Networks. All rights reserved.
Conventions
Symbol
Indication
>
Indicates a button name, for example,
the OK button.
""
Indicates a window name or menu name,
for example, the pop-up window "New
User".
>>
Separates a multi-level menu. For
example, the multi-level menu File >>
New >> Folder indicates the menu item
"Folder" under the sub-menu "New", which
is under the menu "File".
Содержание VG814
