InHand IR615-S Series Скачать руководство пользователя страница 12

Страница: 12 / 69

2.2 Installation of SIM/UIM Card

IR6XX-S series apply pop-up card holder. Press the yellow button on the right of the card holder

and the card holder will pop up. Then, install the SIM/UIM card and press the card holder back to

the card slot.

2.3 Installation of Antenna

Slightly rotate the movable part of metal SMA-J interface until it cannot be rotated (at this time,

external thread of antenna cable cannot be seen). Do not forcibly screw the antenna by holding

black rubber lining.

2.4 Installation of Protective Grounding

The specific steps are shown in below:

Step 1: Remove the grounding screw.

Step 2: Connect the grounding ring of the cabinet’s grounding wire onto the grounding

screw.

Step 3: Tighten the grounding screw up.

To improve the immunity from interference of whole router, the router must be grounded when
using. According to operating environment, the ground wire should be connected with
grounding stud of router.

2.5 Installation of Power Supply

Upon installation of the antenna, connect the device to 9~26V DC power and see if the Power

LED on the panel of the device is on. If not, please contact technical support of InHand Networks

immediately.

Содержание IR615-S Series






































































Результаты поиска

Содержание IR615-S Series

Отзывы:

Похожие инструкции для IR615-S Series

Бренды по названию

Популярные бренды

InHand IR615-S Series, Руководство пользователя

Результаты поиска

Содержание IR615-S Series

Отзывы:

Похожие инструкции для IR615-S Series

Бренды по названию

Популярные бренды