WEB Configuration Manual
- 11 -
This page set the auto-shutdown port and delay time of shutdown. Click the
Set
in the bottom
control bar to complete the configuration, and click the
Save
on the top. The corresponding port will
be shutdown in delayed time after the switch turned on.
3.5 Software
If you click
Basic Setting -> Software
in the navigation bar, the
Software
management page
appears, as shown as below figure:
Current running version and ROM version could be checked at this page. Click
Export
to export
current running version to computer. Choose the to-be-updated software version and click
Update
to change system’s software version on
Software Update
Column.
Note
:
The updated system’s software will be valid only if the device is restarted.
3.6 Load/Save
If you click
Basic Setting -> Load/Save
in the navigation bar, the page appears as shown as below
figure:
Click the “Export” then the current configuration of system will be exported to computer, click the
“ Import” then related configuration document will be imported to switch.
