(7)
Open VPN Advanced
This configuration page is only used for the Open VPN Server.
Name
Description
Enable Client-to-Client
Enable client access to other clients
Client Management
Tunnel Name
Tunnel Name of the Client
Username/Common Name
Username (using Username/password mode) or Common Name in CA (CA mode)
Local Static Route
The client subnet
Remote Static Route
The server subnet
Attention: CA can only be produced by customer’s PC; InRouter700 cannot produce CA.
CA needed: Client: root CA (ca.crt), public key (pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt), private key (pri.key)
(5) X.509 Cert -----CA mode for host to host tunnel
CA needed: Client: root CA (ca.crt), public key (pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt), private key (pri.key)
(6) User+X.509 mode------us pa CA certificate
CA needed: Client: root CA (ca.crt), public key (pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt), private key (pri.key)
Pre-shared Key
Set shared key or TLS-AUTH static password
Remote Subnet, Remote Net mask
Set the static route of the router, always towards the subnet of its peer
Link Detection Interval, Link Detection Timeout
Always use default
Renegotiate Interval
Always use default
Enable NAT
Set NAT mode, meanwhile it will disable route mode
Enable MPPE
Enable MPPE, always set in server
Enable LZO
Enable LZO compression
Encryption Algorithms
Set encryption algorithms, must match with the server
MTU, Max Fragment Size
Always use default
