You can click “Show Detail Status” to observe the specific connection details, or click “Add” to add a new tunnel.:
Now you have successfully built a high-security IPSec tunnel.
Here’s an example. We set an IPSec Tunnel from subnet: 192.168.220.0/24 to subnet: 192.168.123.0/24, when it succeeds,
the screen will show:
And the PC in IPSec client subnet can get access to the server’s subnet.
Open command in your PC, then ping a PC in the server’s subnet:
2.5
Reset to Factory Defaults
2.5.1
Hardware Approach
Legend: On--
Off--
Blink--
1) Press and hold RESET button while turning on IR700:
2) When you see ERROR LED turns on (about 10 seconds after power on), release the RESET button:
