2.4
Quick IPSec VPN Configuration
If you need to build a VPN tunnel to access to your remote PLC through Internet or you need to ensure security of
the data transmission, here’s a quick configuration guide of IPSec for InRouter700 Series
Connect PC with Router to enter router configuration interface, select “VPN” => “IPSec setting”:
Enable NAT-Traversal (NATT): select enable.
Keep alive time interval of NATT: set the “Keep alive time interval of NATT”, default is 60 seconds.
Enable Compression: select enable.
Please change the parameters according to actual situation.
Click “Apply” to complete the configuration.
1
）
Select “VPN”=> “IPSec Tunnels” to check or modify parameters of IPSec Tunnels.
