![InHand InGateway502 Скачать руководство пользователя страница 106](http://html1.mh-extra.com/html/inhand/ingateway502/ingateway502_user-manual_2061305106.webp)
102
•
Challenge: specifies the challenge code of the certificate, which is required for
certificate revocation (optional).
•
Challenge Confirm: Enter the challenge code again to confirm the setting.
•
Unstructured address: specifies the IP address of the certificate.
•
RSA Key Length: specifies the length of the RSA key. The valid value range is
128-2048, and the unit is bit.
•
Poll Interval: specifies the interval at which the device queries the current
certificate status from the server. The valid value range is 30-3600, and the unit
is second.
•
Poll Timeout: specifies the maximum duration for querying the certificate
status. The device considers the certificate application fails when the timeout
period expires. The valid value range is 30-86400, and the unit is second.
•
Revocation: enables or disables certificate revocation.
•
CRL URL: specifies the URL of the certificate revocation list (CRL)
distribution point.
•
OCSP URL: specifies the URL of the Online Certificate Status Protocol
(OCSP) server. Generally, it is the same as the URL of the CA server.
Note: When using a certificate, ensure that the system time is consistent with the actual
time.
Содержание InGateway502
