INGOS Ltd. COR400 17.7.2019
Strana 5
Entry to the mode menu
1.
Entry to management menu
Press the SET button and setting button for more than 5 seconds, the LED lights and the
display shows the code F0.
2.
Setting parameters
Setting buttons to select the code and press SET button.
3.
Change settings
Setting buttons to set the parameters of the selected code.
4.
To return to the parameter setting
Press the button SET.
5.
Leave the setting mode
Press the SET button more than 5 seconds, or in 30 seconds the thermostat (when there is
no button operation) will return to normal operating mode.
Setting item
Range setting parameters
Factory setting
code
Temperature difference
1°C ~ 16°C
1°C
F0
Compressor delay
0 ~ 9 minute
0 minute
F1
Lower limit temperature
up to -40°C
-20°C
F2
Upper limit temperature
up to +70°C
20°C
F3
Selectable mode
1:cooling; 2:heating; 3:alarm
1
F4
Temperature calibration
-5°C ~ +5°C
0
F5
3.3 Switching on the instrument
The procedure to turn on the instrument is as follows:
1.
Plug the instrument into the mains with corresponding voltage.
2.
Check hose connections.
3.
Turn on the power switch.
4.
Set the temperature regulator.
5.
Turn on the circulating pump.
