Gpstracker.net.in
Freedom is lost now…!
SMS to the authorized numbers when it goes out of this district.
Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send
SMS“spspace+latitude,longitude;latitude,longitude” to unit to set the restricted district.
In case of breach, it will send SMS “st latitude & longitude” to the authorized numbers at
interval of 3 minutes.
Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while the second
latitude & longitude is the coordinate of the bottom right corner, it will alarm at interval of 3 minutes.
Cancel: Send SMS “nospassword” to deactivate this function.
6.20.6 Multi-area management
6.20.6.1 Set Area
Send SMS command "area+pspace+latitude,lospace+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok".
Example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less than the total distance in the 2
commands, and different areas can't cover each other.
6.20.6.2
Delete areas
Send SMS command:"pspace+area name", tracker will reply:"noarea ok".
6.20.6.3
Rename and set distance
Send SMS command "pspace+old name;new name,distanceM" to tracker, if name is
not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration.
Example: Send"rename123456 area01;school,800M", it means the new area name is "school", and covers
area of a radius of 800 meters.
6.20.6.4
Activate multi-area management
Send SMS command "area+pspace+on" to tracker, it will reply "Area on ok!", when tracker
enter the pre set area, it will send SMS "area name+latitude & longitude" to all the authorized phone
number, and send same SMS when goes out of the area.
6.20.6.5
Deactivate Multi-area management
Send SMS command "area+pspace+off" to tracker, it will reply"area off ok!"
6.20.7 Movement alarm
6.20.7.1.
Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal reception, the user
can send SMS“move+pspace+0200” to the tracker (Suppose area of a radius of 200 meters,
it supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a movement (the
default distance is 200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers
at interval of 3 minutes.
6.20.7.2
Cancel: Send SMS “password” to deactivate the movement alarm.
6.20.8
Over speed alarm
Set up: Send SMS “speed+pspace+080” to the unit (suppose the speed is 80km/h), and it will
reply “speed OK!”. When the target moves exceeding 80km/h, the unit will send SMS “speed+080!+
latitude & longitude” to the authorized numbers at interval of 3 minutes.
