Ingics iGS03M, Руководство пользователя

Страница: 8 / 20

INGICS
​ ​
TECHNOLOGY
LEDs
There are two LEDs indicating the current status. The left one is BLE status LED and the right one
is Network status. Below are their behaviors.
Configuration
To configure the unit, you have to connect it through the WiFi interface. When it is powered on,
you could scan its native AP and connect it with the WiFi of your NB/PC/Mac/Tablet/Smartphone. It’s
On Flash
BLE
Status
LED find tag/beacon in range BLE transmission
happening
Network
Status
LED WiFi/LTE-M connection
success
(This only implies the network
is connected. It doesn’t mean
the server is connected) Green​: WiFi/LTE-M
network transmission
happening
Orange​:
If IGS03M does not insert
SIM card and being used
as WiFi device
Network Status LED behavior Description Status
ORANGE​ LED on (500ms) Boot start Booting
RED​ LED blink (100ms on/off) Joining AP (If WiFi in STA mode) Booting
RED​ LED blink (500ms on/off) LTE connecting carrier Booting
GREEN​/​ORANGE​ LEDs blink interleaved
(100ms) WPS enrollee WPS
GREEN​ LED on Network ready Ready/Idle
ORANGE​ LED on Network ready (If SIM card is not inserted) Ready/Idle
GREEN​ LED blink (200ms on/off) Network is transfering data
(If SIM card is not used on iGS03M, shows
ORANGE​ LED blink instead) Busy
RED​ LED ON (1sec) Connect failure Error
RED​ LED blink (5sec on/off) Misconfiguration Error
RED​ LED ON (5sec) LTE init failure Error
​ ​
INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.COM
8