background image

INGICS

 ​

TECHNOLOGY

 

Users can set up to 6 entries of the payload filter to make sure only relevant  information 
is received. If the pattern list is empty, it means the payload whitelist function is disabled, 

all payload will be allowed. 

BLE MAC Whitelist 
Set BLE beacon MAC addresses to 

configure the BLE MAC whitelist. 

Gateway will only report the advertising 

data broadcasted from the beacons 

which match the whitelist. 

Users can set up to 10 MACs to make sure only relevant information is received. If the list 
is empty, it means the BLE MAC whitelist function is disabled. All BLE beacons are 

allowed. 

Security 

Device Key/Certification/Server CA Upload 

Users can upload device certification, private key and server CA files in PEM format on 

this page. All these files may be used by MQTTS or HTTPS functions. 

 

LTE 

LET Settings 

Access Point Name 

The APN setting for the carrier setting. 

Authentication 

The auth type based on the carrier 

setting. 

Username/Password 

The username/password based on the 

carrier setting. 

DNS Servers 

In case the users want to specify 

 

 

         

 ​

INGICS TECHNOLOGY CO., LTD.    •    [email protected]    •    WWW.INGICS.COM 

  15 

Содержание iGS03M





















Отзывы: