Ingeteam INGEREV RAPID ST Series, Инструкция по установке и эксплуатации

Страница: 23 / 48

ABX2011IQM01_ - Installation and Operation Manual
3. Transportation and handling of the unit
The unit must be protected during transport from mechanical shocks, vibrations, water projections (rain) and any
other product or situation that may damage or alter its behavior.
Failure to observe these instructions may result in the loss of the warranty on the product.
3.1. Unpacking
Correct handling of the units is vitally important in order to:
• Prevent damage to the packaging which enables them to be kept in optimum condition from shipping
until they are installed.
• Avoid knocks and/or falls which may harm the mechanical features of the units, e.g. cause incorrect
closure of doors, loss of IP rating, etc.
• Avoid, as far as possible, vibrations which may cause subsequent malfunction.
If you observe any anomaly, please contact Ingeteam immediately.
Separating the packaging
You can deliver all the packaging to an authorized non-hazardous waste management company.
In any event, each part of the packaging may be recycled as follows:
• Plastic (polystyrene, bag and bubble wrap): the appropriate container.
• Cardboard: the appropriate container.
3.2. Handling
INGEREV Rapid ST family charging stations are designed for handling from the top. For this, a removable cover
has been fitted in the upper part of the enclosure that allows access to the four planned lifting points.
Top station opening
23
Transportation and handling of the unit Ingeteam