Ingeteam INGEREV RAPID ST Series, Инструкция по установке и эксплуатации

Страница: 10 / 48

ABX2011IQM01_ - Installation and Operation Manual
1. About this manual
The purpose of this manual is to describe the INGEREV RAPID ST units and to provide appropriate information for
their correct reception, installation, start-up, maintenance and operation.
1.1. Scope and nomenclature
This manual is applicable to the following units:
Complete name Abbreviation
INGEREV RAPID ST200 One ST200 One
INGEREV RAPID ST200 Duo ST200 Duo
INGEREV RAPID ST400 Duo ST400 Duo
1.2. Recipients
This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating this unit.
The responsibility for designating qualified personnel will always fall to the company to which the personnel
belong. It is necessary to decide which workers are suitable or not for carrying out specific work to preserve their
safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their personnel and
for familiarizing them with the contents of this manual.
1.3. Symbols
Throughout this manual we include warnings to highlight certain information. Relative to the nature of the text,
there are three types of warnings:
DANGER
This indicates a hazard to personnel or the charger.
CAUTION
Indicates importance.
INFO
Additional information or references to other parts of the document or documents.
10
About this manual Ingeteam