Ingeteam Ingecon Sun 3.6TL U, Руководство по установке

Страница: 36 / 64

G1 G2 L2 L1 P1 P2 S1 S2 N + -
8. Make the field connections as are detailed in this manual.
9. Close the transformer box cover.
10. Check that the transformer is securely in place.
5.3. Electrical connection
Once the unit has been mounted in its definitive location and is firmly secured, the next step is to make the electrical
connections.
The Ingecon
®
Sun Lite U cable access ports are located in the lower part of the casing. Each type is described below.
5.3.1. Terminals for the DC connection
DC connection is made by screw terminals.
There are four pairs of terminals available that allow installer to design the installation with one to four strings for
each pole. This terminal are protected by a DC fuse. It is another terminal available but, in this case, the overcurrent
protection has to be provide by the installer.
The wiring have to comply with the provisions of the National Electrical Code ANSI/NFPA70, Canadian
Electrical Code CEC and other Local or State Codes.
36
Ingeteam Inc Installation manual
AAY2000IKI02