Ingeteam Ingecon Sun 250 TL, Руководство по установке

Страница: 30 / 92

30
Ingeteam Energy, S.A.
AAV2000IKI01
Installation manual
4.5. Cabinets for the various models
Ingecon
®
Sun Power Max units comprise 2 to 4 cabinets:
• Cubicle A: DC Module
• Cubicle B: Inverter modules 1-2
• Cubicle C: Inverter module 3 or inverter modules 3-4
• Cubicle D: AC Module
The table below indicates which cabinets each model includes:
Model Cubicles
250 TL, 315HE TL, 365HE TL, 400HE TL, 420HE TL Cubicles A, B and D
375 TL NAC, 500HE TL NAC, 550HE TL NAC,
600HE TL NAC, 630HE TL NAC
Cubicles A, B and C
375 TL, 500HE TL, 550HE TL, 600HE TL, 630HE TL Cubicles A, B, C and D
500 TL NAC, 625HE TL NAC, 730HE TL NAC,
800HE TL NAC, 840HE TL NAC
Cubicles A, B and C
500 TL, 625HE TL, 730HE TL, 800HE TL, 840HE TL Cubicles A, B, C and D
It is strictly forbidden to gain access to the inside of the electrical panel through any other point
than the access cover provided for the purpose. Opening any of the enclosure covers and/or access-
ing them (from the side, rear or top) triggers a general shutdown of all power to the panel (PV array,
3-phase feed and auxiliary single-phase feed). Always access when the unit is voltage-free.
Any work carried out which implies a modification of the original electrical settings must be pro-
posed to and accepted by Ingeteam Energy S.A.
Below are the obligatory safety standards and the various tasks that may be performed in the various cubicles.