Ingersoll-Rand W5133P-C1D1, Информация о продукте

Страница: 5 / 20

47610296001_ed3 EN-2
EN
Tool Model - W5133P-C1D2, W5153P-C1D2 Battery Model - BL2012 Battery Model - BL2022
Intelligent Power Control
No Load Speed Shut-off
Max Torque Max Torque
Direction Mode Name ft-lb (Nm) ft-lb (Nm)
Forward
Hand-tight 0-800 Refer to Figure A Refer to Figure A
Wrench-tight 0-1600 Refer to Figure B Refer to Figure B
Mid-power 0-2100 230 (312) 240 (325)
Max-power 0-2100 280 (380) 340 (460)
Reverse ALL Max-power 0-2100 295 (400) 365 (500)
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Conforms to UL STD. 60745-1 & 60745-2-2.
Certified to CSA STD. C22.2 No. 60745-1 & 60745-2-2.
This tool conforms to UL standard 12.12.01-2017, Class I, Division 2,
Groups A-D, T4; and is certified to CSA standard C22.2 No. 213.
4004004
0 (0)
2 (3)
4 (5)
6 (8)
8 (11)
10 (14)
Forward Torque
ft-lb (Nm)
Figure A —
Hand-tight
Forward Torque
ft-lb (Nm)
Figure B — Wrench-tight
M6 M8 M10 M12 M14
Bolt Size Bolt Size
4 (5)
8 (11)
12 (16)
16 (22)
20 (27)
24 (33)
M8 M10 M12 M14
NOTICE
Torque values shown in Figures A and B are approximate. Actual torque can be effected by the application and may vary from the values
shown in the graph.
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An excessive
accumulation of grease will result in sluggish operation. See drawing 48380273 and table below. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use.
1
8h
1 8h
1 8h
2 8h
(Dwg. 48380273)
1 2
IR# IR#
105 67
Task Light
CAUTION
● Task Light is not user serviceable. Repair should only be carried out by an Ingersoll Rand authorized service center. User service may
result in electric shock, fire and or serious personal Injury .
●
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
●
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.