Ingersoll-Rand VHP300CM, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 26 / 61

Manual - vhp300cm - 26 06/20/00
SECTION 7 – GENERAL DATA
Compressor Model .....................................................................................................VHP300CM
Rated Delivery - CFM (Litres/Sec.)...............................................................................300 (142)
Rated Pressure - PSI (kPa).........................................................................................200 (1400)
Compressor Lube Capacity (Refill) – U.S. gal. (litres).....................................................10 (37.9)
Compressor Oil Filter Element.....................................................................................36860336
Compressor Oil Separator Element ..............................................................................36845469
Air Cleaner Element (Primary) .....................................................................................35326230
Air Cleaner Element (Safety) .......................................................................................35377696
Overall Length (Compressor Module) – inch (mm) .........................................................51.0 (1295)
Overall Height (Compressor Module) – inch (mm)..........................................................42.0 (1067)
Overall Width (Compressor Module) – inch (mm)...........................................................40.3 (1024)
Overall Length (Air Receiver Module) – inch (mm) .........................................................25.0 (635)
Overall Height (Air Receiver Module) – inch (mm)..........................................................48.6 (1234)
Overall Width (Air Receiver Module) – inch (mm)...........................................................22.5 (572)
Weight (Compressor Module) – pounds (kilograms) .......................................................1145 (520)
Weight (Air Receiver Module) – pounds (kilograms) .......................................................260 (118)
Weight (System with lubricants) – pounds (kilograms) ...................................................1480 (672)
Input Power Requirements/Interface:
Hydraulic Motor – Horsepower (MIN.) ...........................................................................108
−
Speed (R.P.M.) ............................................................................2750
Mounting Interface – SAE “C” Flange
−
1.375 inch 21 tooth
−
16-32 DP/30
°
PA Splined Shaft
Cooling Fan Power Requirements:
Hydraulic – 13.2 GPM @ 315 PSI (2.4 HP @ 1750 R.P.M.)
−
(50.0 L.P.M. @ 2175 kPa)
Built by
INGERSOLL-RAND
 Company, Mocksville, N.C. 27028 USA