6
Specifications
Table 2. General Specifications
Hoist Model
Rated
Capacity
metric tons
Load Chain
Falls /
Each Hoist
HP
Air Consumption @
Rated Load
Chain
Size
Standard Lift
scfm
m³/min
mm
ft
m
BHS50
50
2
9.4
280
8
22
30
9
BHS75
75
3
BHS100
100
4
BHS150
150
6
Hoist Model
Speed at 105 psi
(700 kPa / 7 bar)
Speed at 60 psi
(400 kPa / 4 bar)
Lift
Lower
Lift
Lower
fpm
m/min
fpm
m/min
fpm
m/min
fpm
m/min
BHS50
8
2.4
12
3.7
3.4
1.04
4.6
1.4
BHS75
4
1.2
6
1.8
1.7
0.5
2.3
0.7
BHS100
2.5
0.76
3.75
1.1
1.1
0.3
1.5
0.5
BHS150
2
0.61
3
0.9
0.8
0.2
1.1
0.3
Traceability
Load bearing parts are documented to provide
traceability. Documentation includes chemical and
physical properties of raw material, heat treating,
hardening, tensile and charpy tests as required for the
part.
Units with
M1
,
M2
or
M3
in the model code have
traceable load bearing components.
M1
– Material Traceability certificates according to EN
10204 (Ex DIN 50049) 2.2 on load bearing parts.
Conformity documents affirm (by the manufacturer)
that parts are in compliance with requirements of the
order, based on non-specific inspection and testing (i.e.
results are typical material properties for these parts).
M2
– Material Traceability certificates according to EN
10204 (Ex DIN 50049) 3.1b on load bearing parts.
Conformity documents affirm (by a department
independent of the manufacturing department) that
actual parts are in compliance with requirements of the
order, based on specific inspection and testing (i.e.
results are actual material properties for these parts).
M3
– Material Traceability certificates according to EN
10204 (Ex DIN 50049) 3.1b on load bearing parts.
Conformity documents affirm (by a department
independent of the manufacturing department) that the
actual parts used in the product are in compliance with
the order, based on specific inspection and testing (i.e.
results are actual material properties for these parts in
a finished, as delivered condition).
