Ingersoll-Rand FA150KGi Series, Информация о продукте

Страница: 2 / 16

Only allow
Ingersoll Rand
trained technicians to perform maintenance on this product. For additional information contact
Ingersoll Rand
factory or nearest
Distributor.
For additional supporting documentation refer to Table 1 ‘Product Information Manuals’ on page 2.
Manuals can be downloaded from www.ingersollrandproducts.com.
The use of other than genuine
Ingersoll Rand
replacement parts may result in safety hazards, decreased performance and increased maintenance and will invalidate all warranties.
Original instructions are in English. Other languages are a translation of the original instructions.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Table 1: Product Information Manuals
Publication Part/Document Number Publication Part/Document Number
Product Safety Information Manual (Man Rider) MHD56251 Product Maintenance Information Manual MHD56471
Product Parts Information Manual MHD56472
PRODUCT DESCRIPTION
FA150KGi winches are air powered, planetary geared units designed for only
transporting personnel. FA150KGi winches are supplied with an internal automatic
disc brake and an automatic drum band brake.
Output from the externally mounted piston air motor is transmitted through a
coupling and shaft to the planetary reduction gear assembly.
The output from the planetary reduction gear assembly is connected to the wire rope
drum through the output shaft. The disc brake attaches to the inboard upright at
motor end and is connected to the input sun gear through brake shaft.
The disc brake is automatically applied when winch is in neutral or operated in the
haul-in direction; disengaged when winch is operated in the payout direction.
During winch operation a sprag type clutch in the disc brake allows drum rotation in
the haul-in direction with disc brake engaged. This ensures brake will respond quickly
to hold the load when winch operation stops. Operation of winch in payout direction
directs pressurized air to brake piston to overcome spring force and release brake.
When payout operation is complete air is vented and brake is automatically applied.
The drum band brake operates by applying a friction force between the drum band
and winch drum. The automatic drum band brake operation is similar to the disc brake
with the following exceptions: the brake fully disengages in both the haul-in and
payout directions and has no sprag clutch.
2 Form MHD56470 Edition 4