C950 PLANNING & INSTALLATION MANUAL
27
TP0029 Rev.5
Ó
2000 Ingersoll-Rand Company
Date of Revision: 15 August, 2000
NOTE
The initial lubricant supply required for the compressor installation is not normally
supplied with the compressor.
NOTE
Failure to meet this specification may result in damage to internal compressor
components.
NOTE
The Pour point specification
must
be met unless there is a means available for
heating the oil when used in low temperature areas.
NOTE
Oil specifications are constantly being reviewed. Verify that correct oil is used by
consulting appropriate serial number manual. Ingersoll-Rand does not endorse any
other trade name product or any individual oil company.
Reservoir Capacities
Model Number
Sump Capacity (Gallons)
Sump Capacity (Liters)
Total Oil System
Capacity (gal/lit)
C950
105
397
110 gal/ 416 liter
Actual capacities will vary with specific sumps. The above listed values are for standard
Centac models. Total oil system capacities account for reservoir oil capacity plus oil piping.
Review of the Specification section of the compressor Operation Manual is recommended
for exact capacity of a specific unit.
The above values do not apply to API style sumps.
01_
35 of 41
90.10_Pre-Installation and Operation Manual
