Ingersoll-Rand 46P3, Информация о продукте

Страница: 3 / 56

80167588_ed2 EN-1
EN
Product Safety Information
Intended Use:
These tools are designed to remove and install threaded fasteners.
For additional information refer to Air Pulse Tool Product Safety Information Manual
Form 04584983.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model(s) Style
Drive
Free
Speed
Sound Level dB (A)
(ISO15744)
Vibration m/s²
(ISO28927)
Type Size rpm † Pressure (L
p
) ‡ Power (L
w
) Level *K
46PQ1 Pistol Insert Bit 1/4” 9,000 72.6 83.6 < 2.5 ---
46P3 Pistol Square 3/8” 9,000 72.6 83.6 3.7 1.1
56PQ1 Pistol Insert Bit 1/4” 8,000 75.2 86.2 3.7 1.1
56P3 Pistol Square 3/8” 8,000 75.2 86.2 3.7 1.1
61PQ1 Pistol Insert Bit 1/4” 6,600 77.8 88.8 < 2.5 ---
61P3 Pistol Square 3/8” 6,600 77.8 88.8 < 2.5 ---
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
*K= Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585747 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-off valve 9. Oil
5. Hose diameter
After each 20,000 cycles , or as experience indicates, drain and refill the Impulse Unit Drive
Assembly using the Fluid Replacement Kit (Part No. EQ106S-K400). Lubricate the hex drive and
the output shaft before assembly.