3
Form P7743 Edition 1
AGENCY SYMBOL IDENTIFICATION
LUBRICATION
Always use an air line lubricator with these tools. We
recommend the following Filter-Regulator-Lubricator
Unit:
Inside USA use FRL unit # C28-04-FKG0-28
Outside USA use FRL unit # C28-C4-FKG0
Before starting the tool and after each two or three hours
of operation,
unless the air line lubricator is used, pour
approximately 1.5 cc of Ingersoll-Rand No. 10 Oil into the
air inlet.
Periodically,
inject several drops of Ingersoll-Rand No. 10
Oil between the Ratchet Housing and Ratchet Yoke to
lubricate the Drive Bushing.
INSTALLATION
(Dwg. TPD905-2)
Indicates compliance with
relevant EC directives.
European Community Mark
Ingersoll-Rand No. 10
Ingersoll-Rand No. 28
and
Ingersoll-Rand No. 66
F
L
R
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Lubricator
Emergency
Shut-Off
Valve
Regulator
Filter
Compressor
FRL
Drain Regularly
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø