DAB-XPlorer / DABXP / DABRF
– Getting Started
5
1 Introduction
The DABXP-HWU is an ETI/RDI to USB converter. DABRF-HWU and DABRF-RM are DSP-
based professional DAB receivers with integrated DAB modulators. All three in according
with standard ETSI EN 300401 V2.1.1.
The configuration of the devices can be carried out via the DAB-XPlorer PC Software and
partially via web browser.
The DABXP-HWU is available in a 30 x 110 x 106 mm
3
housing with USB powering. DABRF
is available in a 30 x 110 x 176 mm
3
housing with an external 12V power supply. DABRF-RM
is a 19” system with an integrated power supply.
1.1 Conventions
In this manual the following conventions are used as text markers:
Electrical Safety
Indicates danger of electric shock. For reasons of security, these instructions must
be followed by all means.
Attention
Indicates very important advice that is absolutely to observe. In case of non-
observance malfunctions and even system errors are possible.
Important Note
Indicates instructions which make sense or are very useful for the usage of the
device or the software.
1.2 Read the documentation
Before connecting the DAB-XPlorer, DABRF, DABRF-RM or the CM-Stick with
your PC and before installing the software, please read section 6. This section
contains a step-by-step installation procedure.
Please visit us at
http://www.ib-mulka.de
for information about current extensions and new
developments.
We hope that you will be satisfied with your DABXP-HWU, DABRF-HWU or DABRF-RM. If
you have any questions, please feel free to contact us; we will be pleased to receive your
comments or requests at any time.