Ingenieurbüro Mulka
The world of bit streams is our business.
© 2018
– Ingenieurbüro Mulka
22
Back View
Figure 11
– Back view of the DABRF-RM
Component
Description
Power
Power Connector with On/Off switch
EARTH
Earth Screw
The DABRF-RM must be earthed. The earthing can be carried out via
the earthing screw on the back side of the unit.
RST
Reset Button
To run the DABRF in BOOTP mode press the button for around 8
seconds until the Ethernet LED’s are flashing.
B1
Auxiliary Button #1
The usage of that button depends on the running application.
B2
Auxiliary Button #2
The usage of that button depends on the running application.
LED GPS
LED red / green
A flashing red colour indicates the proper operation of application. A
flashing green colour indicates the 1PPS pulse.
LED INF
LED orange
The usage depends on the running application.
LED RX
LED yellow
The usage depends on the running application.
LED TX
LED yellow
The usage depends on the running application.
LAN
Gigabit Ethernet connector
Need an Ethernet connection with a running DHCP server to provide a
valid IP address to DABRF. As fallback it will be used a link-local
address from the address block 169.254.0.0/16.