3/9
© 2019 Ingenico Inc.
Security of your Moby/6500
Upon receipt of your card reader you should check for signs of tampering
of the equipment. It is strongly advised that these checks are performed
regularly.
You should check, for example: that the keypad is firmly in place; that
there is no evidence of unusual wires that have been connected to any
ports on your reader or associated equipment, the chip card slot, or any
other part of your reader. Such checks can provide warning signs of
unauthorized modifications to your card reader, or other suspicious
behavior by individuals that have access to your reader.
Your reader detects tampering. If the reader is tampered, it will
repeatedly flash the message
“Alert Interruption!”
and further use of the
reader
will not be possible. If you observe the “Alert Interruption!”
message, you should contact our helpdesk immediately.
Battery
Moby/6500 is fitted with a lithium battery which is not accessible to the
user.
•
Only use chargers with rating that match the power ratings.
•
Moby/6500 can be charged with the USB-C cable connected to a
mobile phone charger.
•
Do not attempt to open the reader.
Warning
Risk of explosion if battery is replaced by an incorrect type. Do
not disassemble. Do not short-circuit. Do not dispose in fire. Do
not throw in water. Dispose used batteries according to the
instructions.
Charging
•
Before using the reader for the first time, the Moby/6500 must be
charged for about 60 minutes via a USB port wall charger with a
power output of 260 mA.
•
A battery indicator is provided on the
reader’s
display, indicating the
battery’s
charge level. When connected to a charger, the symbol
changes to charging.
