SKYZER TECHNOLOGIES
PAGE 109 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE
Version 1.0
15 SAFETY AND MAINTENANCE
15.1 CLEANING OF THE TERMINAL
First of all, unplug all the wires from the terminal.
•
DO NOT allow any water to enter inside the case. Remove any dust,
accumulated dirt or grime from the case using a damp cloth.
•
DO NOT use solvents, cleaning fluids or abrasives. These materials could
damage the plastic housing and any exposed contacts.
•
DO NOT clean the electrical connections.
•
DO NOT put anything into the slot of the smart card reader.
15.2 GENERAL SAFETY INFORMATION
This equipment has been designed and manufactured to meet international
safety standards but, like any electrical apparatus, due care must still be
taken:
•
Do read and understand the instructions before using the equipment
•
DO NOT expose this apparatus to rain or moisture. This product is
approved for indoor use only. Where necessary, use a protection cover
that prevents ingress of water.
•
DO NOT remove any screws or non-operator accessible covers.
•
DO NOT insert any metallic objects.
•
DO NOT allow liquid to spill into the terminal’s openings.
•
DO NOT allow anything to rest on the power or telecom cords and
ensure that all cables are routed to prevent damage or accidental
contact.
•
DO NOT continue to operate the equipment if you are in any doubt
about it working normally, or if it is damaged in any way. Withdraw the
mains plug and consult your service agent.
15.3 INGRESS GUARDS
To help minimise risk of dust or water ingress to the terminal, the use of an
ingress guard is recommended.
Recommended supplier:
KeyCovers (Auckland)
Email:
Phone:
(09) 845 1464
