EFT930 Wireless Series
•
19/36
Copyright © 2009 Ingenico
9000001568 R11 000 02/941
All rights reserved
•
With 2 RS232
(EFT930P/EFT930G/EFT930W)
Follow the below instructions to connect the base to the telephone network:
•
Connect telephone plug
C
, possibly in conjunction with a closing relay satisfying the
standards applicable in the country of use, to the telephone network
D
.
Connect the other end of the cable to socket
G
on the base.
•
If present, connect telephone
A
(the presence of telephone
A
is not required for the
terminal to function)
•
France: connect
B
to the telephone network
D
via the stackable socket
Connect the power supply unit
F
to the mains power supply network socket.
Socket G
: TNV-3 circuit: Telecommunications Network Voltage, in accordance with safety
standard EN 60950.
Sockets I and J
: as these connections are for ELSV circuits (extra low safety voltage), they
shall be interconnected to equipment with interfaces supplied by circuits of the same type.
WARNING
Switch off the terminal prior to connecting the base to the appropriate network.
Marking
A
= possible telephone handset
B
= telephone connector (country specific)
C
= connection to the telephone network
D
= telephone network socket
E
= mains power socket
F
= power adapter
G
= telephone network - port RJ11 (telephone cable 3m)
H
= power input - 2pole sockets 1 A
I
= 1
st
RS232 (cash register, local loading tool...) Level RS 232/V28
J
=2
nd
RS232
