Avaya QE - Configuration Guide
pg. 7
3.2 Change or Update Configuration
The “Change or update configuration of the unit” setting in the Startup Tool, the Ingate
Unit must have already been assigned an IP Address and Password, either by the Startup
Tool – “Configure the unit for the first time” or via the Console port.
In the Startup Tool, when selecting “Change or update configuration of the unit”, the
Startup Tool will connect directly with the Ingate Unit on the network with the provided
IP Address and Password. When completed, the Startup Tool will completely overwrite
the existing configuration in the Ingate unit with the new settings.
Note:
If the Ingate Unit does not have an IP Addressed and Password assigned to it,
proceed directly to Section 4.1: “Configure the Unit for the First Time”.
Configuration Steps:
1)
Launch the Startup Tool
2)
Select the Model type of the Ingate Unit, and then click Next.
