Avaya QE - Configuration Guide
pg. 15
3.3.3 Product Type: DMZ SIParator
When deploying an Ingate SIParator in a DMZ configuration, the Ingate resides on a
DMZ network connected to an existing Firewall. This existing Firewall must be the
Default Gateway for the DMZ network; the existing Firewall is the primary edge device
for all data and voice traffic out of the LAN and DMZ to the Internet. SIP Signaling
and Media must be forwarded to the Ingate SIParator, both from the Internet to the
SIParator and from the DMZ to the LAN.
Configuration Steps:
1)
In Product Type, select “DMZ SIParator”.
2)
Define the IP Address and Netmask of the DMZ (Interface Eth0). This is the IP
Address that will be used on the Ingate unit to connect to the DMZ network side
on the existing Firewall.
