Avaya QE - Configuration Guide
pg. 24
2)
Enter the IP Address of any Avaya QE phone. The IP Address should be on the
same LAN subnet as the Ingate unit.
3)
When Avaya QE is selected as the IP-PBX type, then the option “PBX registers
at the Ingate” is automatically selected. When is option is enabled, the Ingate
Registrar is enabled, later on the ITSP configuration, Avaya QE Identities are
assigned on the Registrar and associated to the incoming call characteristics. So
the Avaya QE registers to the Ingate and the Ingate sends the incoming call to
these registered users/identities.
3.5 ITSP for Avaya QE
The ITSP section is where all of the attributes of the SIP Trunking Service Provider are
programmed. Details like the IP Addresses or Domain, DIDs, Authentication Account
information, Prefixes, and PBX local number. The configuration of the ITSP will allow
for the Ingate unit to know the location of the ITSP as to direct SIP traffic for the use
with SIP Trunking. Ingate has confirmed interoperability many of the leading ITSP
vendors.
