MODEL WATTS MOUNTING HEIGHT AVERAGE
COLD
PROTECTED
SL 1612 SS 1,600 6’ – 8’ (1.8m - 2.4m) 6’ x 6’ (1.8m x 1.8m) 4’ x 4’ (1.2m x 1.2m) 8’ x 8’ (2.4m x 2.4m)
SL 2424 SS 2,400 7’ – 9’ (2.1m - 2.7m) 7’ x 7’ (2.1m x 2.1m) 5’ x 5’ (1.5m x 1.5m) 9’ x 9’ (2.7m x 2.7m)
SL 3024 SS 3,000 7’ – 9’ (2.1m - 2.7m) 8’ x 8’ (2.4m x 2.4m) 6’ x 6’ (1.8m x 1.8m) 10’ x 10’ (3.0m x 3.0m)
SL 4024 SS 4,000 8’ – 11’ (2.4m - 3.4m) 10’ x 10’ (3.0m x 3.0m) 8’ x 8’ (2.4m x 2.4m) 12’ x 12’ (3.7m x 3.7m)
INFRATECH QUARTZ TUBE ELECTRIC HEATERS are furnished with wall/ceiling mount swivel brackets. These
brackets may be discarded when the heater is hung with chains, or other special bracketing.
See sales literature and price list for full listing of models, descriptions, amperages, and voltages. At times,
especially when the mounting height might be quite low, an increased number of smaller heaters can help prevent
overheating.
Heaters up to 15 AMPS can be controlled with a simple INF controller. This low cost controller, which is actually an
infinite switch, gently pulses the heat on and off at regular intervals when not on full power.
Ideal for comfort heat, the best solution is to heat from two sides rather than from just one side. However, there are
times when this is not practical.
Areas covered are approximate dimensions and will vary depending on prevailing and personal comfort levels.
Indoor or well-protected environments will generally exceed average (see charts). Heaters can provide less than
average coverage in extremely cold/windy conditions.
GENERAL NOTES
HEATER COVERAGE AREAS
Before performing any maintenance, power must be disconnected and the heater cool to touch.
Heater housing, reflectors, and heating element can be rinsed with a hose or wiped down with isopropyl alcohol,
acetone, or glass cleaner. Use a clean, scratch-free rag or paper towel. Any oxidation, surface rust, or discoloration
can be removed with a stainless steel cleaner or metal polish on the bare metal surface.
Make sure all water, solvents, or cleaners are removed and the heater is dry before reconnecting the power.
MAINTENANCE INSTRUCTIONS
6
13-7008
End Reflector (
S
et of 2)
13-7004, 13-7002, 13-7000
Body Reflector Fits - (SL 16), (SL 24), (SL 30/40)
13-7034, 13-7032, 13-7030
Lead Wire Set - Fits (SL 16), (SL 24), (SL 30/40)
13-7020, 13-7022, 13-7023
Mounting
Bracket (Set of 2) (Stainless Steel, Bronze, Black)
13-7014, 13-7012, 13-7010
Grill
Guard (SL 16), (SL 24),
(SL 30/40)
13-7028, 13-7026, 13-7024
Stainless Steel Trim (SL 16),
(SL 24), (SL 30/40)
13-7028BL, 13-7026BL, 13-7024BL
Black Trim (SL 16),
(SL 24), (SL 30/40)
REPLACEMENT PARTS
PART #
PART DESCRIPTION QUANTITY
MODEL
WATTS
MOUNTING HEIGHT
AVERAGE
COLD
PROTECTED
SL 1624
1,600
6’ – 8’ (1.8m - 2.4m)
6’ x 6’ (1.8m x 1.8m)
4’ x 4’ (1.2m x 1.2m)
8’ x 8’
(2.4m x 2.4m)
SL 2424
2,400
7’ – 9’ (2.1m - 2.7m)
7’ x 7’ (2.1m x 2.1m)
5’ x 5’ (1.5m x 1.5m)
9’ x 9’
(2.7m x 2.7m)
SL 3024
3,000
7’ – 9’ (2.1m - 2.7m)
8’ x 8’ (2.4m x 2.4m)
6’ x 6’ (1.8m x 1.8m) 10’ x 10’ (3.0m x 3.0m)
SL 4024
4,000
8’ – 11’ (2.4m - 3.4m)
10’ x 10’ (3.0m x 3.0m)
8’ x 8’ (2.4m x 2.4m)
12’ x 12’ (3.7m x 3.7m)
MODEL WATTS MOUNTING HEIGHT AVERAGE
COLD
PROTECTED
SL 1612 SS 1,600 6’ – 8’ (1.8m - 2.4m) 6’ x 6’ (1.8m x 1.8m) 4’ x 4’ (1.2m x 1.2m) 8’ x 8’ (2.4m x 2.4m)
SL 2424 SS 2,400 7’ – 9’ (2.1m - 2.7m) 7’ x 7’ (2.1m x 2.1m) 5’ x 5’ (1.5m x 1.5m) 9’ x 9’ (2.7m x 2.7m)
SL 3024 SS 3,000 7’ – 9’ (2.1m - 2.7m) 8’ x 8’ (2.4m x 2.4m) 6’ x 6’ (1.8m x 1.8m) 10’ x 10’ (3.0m x 3.0m)
SL 4024 SS 4,000 8’ – 11’ (2.4m - 3.4m) 10’ x 10’ (3.0m x 3.0m) 8’ x 8’ (2.4m x 2.4m) 12’ x 12’ (3.7m x 3.7m)
INFRATECH QUARTZ TUBE ELECTRIC HEATERS are furnished with wall/ceiling mount swivel brackets. These
brackets may be discarded when the heater is hung with chains, or other special bracketing.
See sales literature and price list for full listing of models, descriptions, amperages, and voltages. At times,
especially when the mounting height might be quite low, an increased number of smaller heaters can help prevent
overheating.
Heaters up to 15 AMPS can be controlled with a simple INF controller. This low cost controller, which is actually an
infinite switch, gently pulses the heat on and off at regular intervals when not on full power.
Ideal for comfort heat, the best solution is to heat from two sides rather than from just one side. However, there are
times when this is not practical.
Areas covered are approximate dimensions and will vary depending on prevailing and personal comfort levels.
Indoor or well-protected environments will generally exceed average (see charts). Heaters can provide less than
average coverage in extremely cold/windy conditions.
GENERAL NOTES
HEATER COVERAGE AREAS
Before performing any maintenance, power must be disconnected and the heater cool to touch.
Heater housing, reflectors, and heating element can be rinsed with a hose or wiped down with isopropyl alcohol,
acetone, or glass cleaner. Use a clean, scratch-free rag or paper towel. Any oxidation, surface rust, or discoloration
can be removed with a stainless steel cleaner or metal polish on the bare metal surface.
Make sure all water, solvents, or cleaners are removed and the heater is dry before reconnecting the power.
MAINTENANCE INSTRUCTIONS
6
13-7008
End Reflector (
S
et of 2)
13-7004, 13-7002, 13-7000
Body Reflector Fits - (SL 16), (SL 24), (SL 30/40)
13-7034, 13-7032, 13-7030
Lead Wire Set - Fits (SL 16), (SL 24), (SL 30/40)
13-7020, 13-7022, 13-7023
Mounting
Bracket (Set of 2) (Stainless Steel, Bronze, Black)
13-7014, 13-7012, 13-7010
Grill
Guard (SL 16), (SL 24),
(SL 30/40)
13-7028, 13-7026, 13-7024
Stainless Steel Trim (SL 16),
(SL 24), (SL 30/40)
13-7028BL, 13-7026BL, 13-7024BL
Black Trim (SL 16),
(SL 24), (SL 30/40)
REPLACEMENT PARTS
PART #
PART DESCRIPTION QUANTITY
1
1
1
1
1
1
1
alfresco-heating.com
888-Warm-Glo
