InfraTec VBIP-G, Руководство пользователя, Страница: 16 / 34

VarioCAM ® HD head
6. Quick guide
14 © InfraTec GmbH 2016 User Manual
6 Quick guide
The procedure described below is intended to make your first operation of the VarioCAM
® HD head
easier. In order to achieve professional results, we recommend meticulous reading of the entire manual.
6.1 Preparation
You will need the following equipment:
■ VarioCAM ® HD head
■ Wall plug transformer* with LEMO connector
■ Ethernet cable* with 8-pin LEMO connector
■ IRBIS ® 3 software*
6.2 Start
■ Provide for power supply for the VarioCAM ® HD head by
■ inserting the power supply cable of the wall plug transformer* – 14-pin LEMO connector (red dot
pointing to the top) – into the right LEMO socket on the reverse of the camera
or
■ inserting the Ethernet cable (when using PoE power supply) – 8-pin LEMO connector – into the
left LEMO socket. In order to avoid confusions, the Ethernet cable is marked blue.
■ Establish the Ethernet connection to the computer:
■ Insert the Ethernet cable with the 8-pin LEMO connector (red dot pointing to the top) into the left
LEMO socket.
■ Remove the protective cap from the lens.
■ Push the Power button and the device is switched on. System initialization is indicated by the
power-on LED initially flashing green. The power-on LED then illuminated permanently in green
indicates that the VarioCAM ® HD head is ready-to-operate in Live mode.
In order to switch off the device, the Power button must be pressed for 5 seconds or the power
supply must be disconnected.
When using an optional “ever on” wall plug transformer or an “ever on” breakout box, the
VarioCAM ® HD head can only be switched off by disconnecting the power supply.
InfraTec