InfraTec VBIP-G, Руководство пользователя, Страница: 10 / 34

VarioCAM ® HD head
3. Technical description
8 © InfraTec GmbH 2016 User Manual
■ PC interfaces* (USB2.0/WLAN/Bluetooth)
■ Video image interfaces* (DVI-D, FBAS)
Optomechanics
With the help of an optomechanic assembly, the following functions are implemented:
■ Focus (motor focus)
■ Measuring range switch-over (apertures) *
■ Internal NUC ( N on U niformity C orrection) with shutter
Furthermore, this assembly optionally comprises a module for hardware-based increase of the geometric
resolution of the thermography system to (2,048 x 1,536) IR pixels (detector with [1,024 x 768] pixels) and
(1,280 x 960) IR pixels (detector with [640 x 480] pixels) in the “Resolution Enhancement”* mode.
Interfaces and controls
The VarioCAM
®
HD head can be controlled remotely using the optional RS232, GigE-Vision, Bluetooth or
WLAN interfaces by means of commands. Operation is explained in the manuals of the corresponding
software.
Power supply
Optionally,
■ an external 15V wall plug transformer (accessories)* or
■ power over Ethernet* (48 V; IEEE 802.3at standard for a type 1 PD)
can be used to supply the VarioCAM
® HD head with power.
The wall plug transformer is connected to the 14-pin (right-hand side) LEMO socket on the reverse of the
housing.
Interfaces
The thermography system is equipped with the following interfaces:
■ RS232* (LEMO 14-pin)
■ DVI-D (HDMI connector) behind the cover on the reverse of the camera, composite video (LEMO 14-
pin)
■ 2 x digital I/O (5V) for external trigger input/trigger output* (LEMO 14-pin)
■ 2 x analog output* 0-5V (LEMO 14-pin)
■ GigE-Vision* (LEMO 8-pin)
■ USB2.0* (mini-AB, behind the cover on the reverse of the camera)
■ WLAN*
■ Bluetooth*
■ Process interface*
Simultaneously using several interfaces on the 14-pin LEMO socket is allowed for by means of a
breakout box*. When using a breakout box*, the breakout box* is also used for external power supply.
InfraTec