infrared industries IR-8400D, Руководство оператора

Страница: 20 / 37

19
I D E N T I F Y I N G A C T I O N S W H E N P U M P I S O N
The 8400D will display this screen when Measure is
selected from the Standby screen. It is possible to
customize the display screen settings by going to
Display Settings in Menu 2. This allows the operator to
select any or all of the values shown to be displayed on
the screen.
M E A S U R E – Selecting MEASURE allows the operator to turn the pump on and off. When the pump
is off, the display will return to the Standby screen. To start pump when the measurement of a specific
gas concentration is desired simply press the
MEASURE button. Once the pump has been turned on the
screen menu will change from MEASURE , ZERO , PLAY , and MENU , to MEASURE , PRINT , HOLD , and
RECORD . Pressing the MEASURE key once more while the pump is running will stop the pump and
return you to the standby menu.
P R I N T – Prints data to a printer connected to the serial port located in the Junction Box.
H O L D / R E S U M E – Selecting the HOLD key will lock the display values to capture that moment in
time. Once the HOLD key has been initiated the HOLD enunciator will change from HOLD to RESUME .
To return to normal operation press the RESUME key and return to a live display.
R E C O R D – The analyzer has the ability to store data by selecting RECORD . The recorded
information will remain in memory until it’s erased. To erase the data in memory enter into the Menu 1
options and select Erase Data. Once you have selected this option you will be asked if you wish to erase
stored data. Select
YES to erase data or NO and return to the standby screen.