3. POWER SUPPLY
3.1 Battery Usage
3.2 Battery Recharge
1.5V x 2 (Mignon / AA / IEC R6 or equivalent, 1400mAh, e.g.
Varta „AccuPlus Ultra“ No. 5606).
Use rechargeable batteries only. NEVER use normal alkaline
batteries!
A T T E N T I O N !
Never try to charge normal alkaline batteries as there is the
risk of explosion!
Place the batteries into the compartment in the rear bottom part
of the device. Make sure that the polarity of the batteries (+/-)
coincides with the respective marks on the bottom of the com-
partment. The device is ready after a period of 10 seconds and
the status-LED starts flashing. Wrong insertion of batteries will
cause a failure of the device‘s function and batteries will be totally
discharged after about one hour. The device will not be dama-
ged.
To (re-)charge the batteries plug the cord of the AC power adap-
tor to the device‘s power connector. The device will switch off
automatically. The normal charging period is 3.5 hours. The elec-
tronic charging system ensures that the batteries are always
completely charged and can never be overcharged.
U
se the sup-
plied power adaptor only,
oth
erwise the internal electronics may
be damaged!
The charging process is indicated by blinking of the square-LED
on the devices front. The LED will extinguish if charging is com-
pleted.
Very deeply discharged batteries cannot be recognized by the
electronic charging system and thus will not be recharged. Please
remove such batteries and recharge them with a suitable battery
charger.
Page - 4 -
